Banana Pi BPI-F2/BPI-F2S/BPI-F2P BPI-F2S with SunPlus Plus1(sp7021) FPGA development Kit , BPI-F2P for Industrial automation. BPI-F2 with freescale IMX6 chip design ,

Banana is slightly heavier with a 59g operating force and has a shorter travel distance of 3.4mm (this is from the specs where you would find if the switches are good for gaming and typing). I have the Keychron K Pro Banana switches which feels and type pretty good.

2024年12月11日 · After a long time of deliberation, I finally decided to share my OpenWrt setup for the BPI-R4. You can find it in my Smart Home repository and use it as inspiration for your own setup. It uses the OpenWrt image builder and docker or podman on Windows to build the firmware that can be loaded onto the R4. My setup includes five different networks: private …

2024年10月7日 · Change the IP address “192.168.1.1” of the LAN interface on the Banana Pi BPI-R3 / BPI-R4 router to any other (example: 192.168.5.1) and follow this guide to access the ONU SFP module: [OpenWrt Wiki] Accessing the modem through the router. Note: The IP address “192.168.1.10” is used to access the Alcatel-Lucent G-010S-P and Huawei MA5671A.

2024年11月3日 · Remember that the BPI-R4 uses diplexer on the 2.4 GHz and 5 GHz bands (or radios), so both bands (or radios) use the same antennas, you can also try turning off the 2.4 GHz radio and only use the 5 GHz radio to see if this improves the SNR (Signal-to-Noise Ratio), this is the first time that Banana Pi uses diplexer and maybe it is poorly executed.

2024年12月5日 · the newest router devices (R3+R4) have no hdmi so not usable as video streaming device, only old r2 and r2pro have this, but last one is not good as router (lan-ports only connected via 1G, less than old R2, no on-board wifi and only 1 pcie slot). internal wifi of old r2 is only supported till 5.15 as there are breaking changes in linux 6.0 where i could not adapt the …

2024年8月19日 · Hello everyone, I’ve been testing SSD on the Banana PI R4 recently and would like to gather feedback on the SSDs others have used with this device. This will help us better understand which SSDs perform well on the R4. So far, I found some developers used the following SSDs: SanDisk 256GB: Read speed 150MB/s Crucial Micron 1TB SSD (NVMe …

2024年8月30日 · Banana Pi BPI-R4 Wifi 7 BE14 - Pigtails and Antennas BPI-R4(MT7988) So I tried those antennas by Antsym (5.8 GHz, single band, allegedly 8 dB) combined with RG178 pigtails. My Tx speed (from the router to the client) has stayed roughly the same at 2.05 Gpbs on the 6 GHz band 320 MHz and 1.56 on 5 GHz 160 MHz.

2024年11月26日 · Hi everyone, I’m a beginner just starting out and I’m stuck on this and I hope you can help me. I just got a Banana Pi Bpi R4 and I’m having problems with the emmc. I copied the “. img” files to the emmc (booting from NAND) as it says on the Banana pi page/tutorial and it worked but I made a bad ppoe configuration and I couldn’t access the router through luci or …

2024年12月3日 · Banana Pi Router design. BPI-R4(MT7988) Mangus17 December 3, 2024, 2:45am 1. Installed the newest snapshot ...