2024年12月28日 · That being the case, I'm considering adding a BNC female connector to the radio, wiring it to the existing SO-239's internal connections using either RG-174 or RG-316 …

2024年12月6日 · While BNC is easier, I have personally seen BCS "fail in place" 2 or 3 times. All of these were resolved by simply disconnecting and then reconnecting the BNC connector. It …

2011年5月7日 · And with an SMA male to BNC female adaptor screwed into the handheld's SMA jack, it seems even more fragile as the adaptor is a lever arm that increases the stress on the …

2024年2月10日 · Loosen the large nut on the back of the BNC connector and put a drop of blue locktite on the threads on the back of the connector. Do not, I repeat Do not use red locktite. …

4 天之前 · BNC connector question. Thread starter Md116; Start date Yesterday at 7:12 AM; M. Md116 Member. Joined Nov ...

2012年7月15日 · Please excuse me if this appears to be a newbie question, but that's exactly what I am. I have a 50 foot length of cable with PL-259s on each end. I need to cut one of the …

2024年6月2日 · Yes, definitely. BNC is a common connector for scanner antennas, the other variation you'll run into is called SMA, which will look like a tiny threaded stud similar to type-f …

2021年4月6日 · On the SDS100, the antenna connector is recessed somewhat into the case, so a standard BNC Female -> SMA Male does not fit correctly. (It's recessed to maintain water …

2023年5月16日 · I'm thinking I will take a long range antenna that I normally use anyway ( 16.99 on Amazon and gives me almost 3 to 4 miles) then cut or grind the male pin in the antenna …

2023年5月16日 · I have had BNC connector pins get stuck in the antenna connectors for Harris AN/PRC-117 series multiband radios as well (numerous times). What worked for me was to …