2006年11月11日 · 1969 Camaro - GM 2003 Electron Blue Beck Racing 383 cu in 465HP Engine - Sean Murphy Inductions Stage 2 Quadrajet TCI Streetfighter 350 - 3.73:1 Posi 10 Bolt Rear - 12.6 sec qtr mile 69 Camaro and 63 Nova

2012年4月9日 · Going to make an appointment for front end alignment on my 69 coupe, after all new parts and bushings, and subframe in and square. Car sits at height I like, has power steering (Pozzi says power steering on car has an impact oh how you want to set the alignment specs).

1999年6月8日 · If your Camaro is a non-original RS you can easily switch back to the Standard Grill. You won't need any support brackets, you'll actually have to remove the support brackets that are needed for the RS headlamp housing in a non-original RS (This is because a real RS has different front fenders, but yours is not original and I assume you have the standard fenders).

2023年7月20日 · Below are the numbers I achieved with my DIY alignment using GW tubular uppers control arms (with .5 taller ball joints) and stock lower control arms, stock front springs @ stock ride height on my 3rd gen Nova (same front end as 1st gen Camaro). Drivers Side - .4° camber / +5.2° Caster / 1/32" toe in Passenger Side

2009年4月27日 · Stainless steel front end bolt kit 1967 - 69 Camaro Parts Used 69 Camaro front sheet metal 500.00 for everything or fenders 185.00 each fender extensions 30.00 each header panel 60.00 lower valance 50.00 cowl vent panel 35.00 69 RS Fender brackets ORIGINAL 25.00 for both 69 RS outer door cover and backing plate 25.00 for both 69 RS bucket ...

2012年11月21日 · First I put 1/8" of shim in the front and 1/4" in the rear of each a-arm cross shaft, just a guess to get it close. Then loaded the car up on the leveling stands and used 2 pieces of floor tile with light weight grease between them to allow the front wheels to move. The greasy floor tiles isn't optimal but for now that's the best I have.

2012年12月13日 · The 69 standard headlight assembly bolts to the core support only - nothing attached to the fenders. There are two or three small tabs in the fenders with holes in them and these are what the adapters attach to. You can either bolt, pop rivet or weld the adapters on - I bolted mine. No cutting required on a 69. The rest is spot on!

2024年11月3日 · I want to change the emblems to something other than the Z28. The problem is the Z28 emblem has three mounting holes. Can anyone recommend a fender emblem/sorce that will cover these holes. Adhesion emblems would be ok. The location of this emblem is the front end of the fender where the engine displacement usually goes. Thanks.

2020年7月21日 · Speedway Motors' G-Comp line of Chevy suspension parts is engineered for performance, strength and value. This G-Comp front suspension kit is a complete bolt-in front subframe assembly for the 1967-69 Chevy Camaro. This Pro Touring front end is an all-new performance IFS designed around...

2008年6月2日 · Typical 69 front end weight?? Jump to Latest 5.2K views 1 reply 2 participants last post by 40Coupe Jun 2, 2008